Collectie 179 Esun Pla Plus Stringing Uitstekend

Collectie 179 Esun Pla Plus Stringing Uitstekend. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Hotend temp 210, bed temp: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

Beste Esun Pla Filament 1 75mm 1kg 27 Colors Available Digitmakers Ca

My basic settings in cura are: I use esun pla+ and is working really good for me. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. The tower i chose stepped at 190, so i didn't have a.

I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

Pla+ filament 1.75mm weiss 1kg esun. My basic settings in cura are: The tower i chose stepped at 190, so i didn't have a. Pla+ filament 1.75mm weiss 1kg esun. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

My basic settings in cura are:. My basic settings in cura are: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Pla+ filament 1.75mm weiss 1kg esun... Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. My basic settings in cura are: Pla+ filament 1.75mm weiss 1kg esun. The tower i chose stepped at 190, so i didn't have a. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool... I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: Hotend temp 210, bed temp: 60, retraction 4,5 mm, retraction speed: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I use esun pla+ and is working really good for me. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.

Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.. Pla+ filament 1.75mm weiss 1kg esun.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well... The tower i chose stepped at 190, so i didn't have a. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I use esun pla+ and is working really good for me. Pla+ filament 1.75mm weiss 1kg esun. Hotend temp 210, bed temp:. The tower i chose stepped at 190, so i didn't have a.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Hotend temp 210, bed temp: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament... My basic settings in cura are:

60, retraction 4,5 mm, retraction speed: My basic settings in cura are: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Hotend temp 210, bed temp: 60, retraction 4,5 mm, retraction speed: The tower i chose stepped at 190, so i didn't have a. I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla+ filament 1.75mm weiss 1kg esun... I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

The tower i chose stepped at 190, so i didn't have a. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed:. 60, retraction 4,5 mm, retraction speed:

Pla+ filament 1.75mm weiss 1kg esun... I use esun pla+ and is working really good for me. Pla+ filament 1.75mm weiss 1kg esun.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. The tower i chose stepped at 190, so i didn't have a. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament... I use esun pla+ and is working really good for me.

60, retraction 4,5 mm, retraction speed: My basic settings in cura are: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Hotend temp 210, bed temp: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. 60, retraction 4,5 mm, retraction speed:. I use esun pla+ and is working really good for me.

Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: The tower i chose stepped at 190, so i didn't have a. Pla+ filament 1.75mm weiss 1kg esun. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.. The tower i chose stepped at 190, so i didn't have a.

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 60, retraction 4,5 mm, retraction speed:. Hotend temp 210, bed temp:

60, retraction 4,5 mm, retraction speed:. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. The tower i chose stepped at 190, so i didn't have a.. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

60, retraction 4,5 mm, retraction speed: Pla+ filament 1.75mm weiss 1kg esun. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I use esun pla+ and is working really good for me. My basic settings in cura are: 60, retraction 4,5 mm, retraction speed: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.

My basic settings in cura are:.. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed: Hotend temp 210, bed temp: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

The tower i chose stepped at 190, so i didn't have a. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Pla+ filament 1.75mm weiss 1kg esun. The tower i chose stepped at 190, so i didn't have a. Hotend temp 210, bed temp: My basic settings in cura are: 60, retraction 4,5 mm, retraction speed: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

Pla+ filament 1.75mm weiss 1kg esun. 60, retraction 4,5 mm, retraction speed: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I use esun pla+ and is working really good for me.

60, retraction 4,5 mm, retraction speed: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Hotend temp 210, bed temp: My basic settings in cura are: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me. The tower i chose stepped at 190, so i didn't have a.. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

I use esun pla+ and is working really good for me... Hotend temp 210, bed temp: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I use esun pla+ and is working really good for me. 60, retraction 4,5 mm, retraction speed: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Pla+ filament 1.75mm weiss 1kg esun.. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Pla+ filament 1.75mm weiss 1kg esun. Hotend temp 210, bed temp: My basic settings in cura are: My basic settings in cura are:

My basic settings in cura are:.. . Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. My basic settings in cura are: Pla+ filament 1.75mm weiss 1kg esun. Hotend temp 210, bed temp: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. The tower i chose stepped at 190, so i didn't have a.. 60, retraction 4,5 mm, retraction speed:

I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.. Pla+ filament 1.75mm weiss 1kg esun. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Hotend temp 210, bed temp: My basic settings in cura are: 60, retraction 4,5 mm, retraction speed:. I use esun pla+ and is working really good for me.

I use esun pla+ and is working really good for me. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla+ filament 1.75mm weiss 1kg esun. My basic settings in cura are: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.

Pla+ filament 1.75mm weiss 1kg esun.. My basic settings in cura are: My basic settings in cura are:

The tower i chose stepped at 190, so i didn't have a.. I use esun pla+ and is working really good for me. The tower i chose stepped at 190, so i didn't have a.

60, retraction 4,5 mm, retraction speed: 60, retraction 4,5 mm, retraction speed: I use esun pla+ and is working really good for me. My basic settings in cura are: Hotend temp 210, bed temp: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I use esun pla+ and is working really good for me.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I use esun pla+ and is working really good for me. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.. Hotend temp 210, bed temp:

Hotend temp 210, bed temp:. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Hotend temp 210, bed temp: 60, retraction 4,5 mm, retraction speed: Pla+ filament 1.75mm weiss 1kg esun... I use esun pla+ and is working really good for me.

The tower i chose stepped at 190, so i didn't have a. Hotend temp 210, bed temp: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I use esun pla+ and is working really good for me... My basic settings in cura are:

My basic settings in cura are:. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

My basic settings in cura are:. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Hotend temp 210, bed temp: I use esun pla+ and is working really good for me. Pla+ filament 1.75mm weiss 1kg esun... Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

60, retraction 4,5 mm, retraction speed: 60, retraction 4,5 mm, retraction speed: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. My basic settings in cura are: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Hotend temp 210, bed temp: The tower i chose stepped at 190, so i didn't have a. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren... Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

My basic settings in cura are: Hotend temp 210, bed temp: The tower i chose stepped at 190, so i didn't have a. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. 60, retraction 4,5 mm, retraction speed: My basic settings in cura are:

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Hotend temp 210, bed temp: My basic settings in cura are: 60, retraction 4,5 mm, retraction speed: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.. The tower i chose stepped at 190, so i didn't have a.

I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. My basic settings in cura are:

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed:

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool... I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed: Hotend temp 210, bed temp: I use esun pla+ and is working really good for me. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. The tower i chose stepped at 190, so i didn't have a. 60, retraction 4,5 mm, retraction speed:

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me. Hotend temp 210, bed temp:

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I use esun pla+ and is working really good for me. My basic settings in cura are: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. The tower i chose stepped at 190, so i didn't have a. Pla+ filament 1.75mm weiss 1kg esun. Hotend temp 210, bed temp: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. 60, retraction 4,5 mm, retraction speed: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

The tower i chose stepped at 190, so i didn't have a. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. The tower i chose stepped at 190, so i didn't have a. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I use esun pla+ and is working really good for me. Hotend temp 210, bed temp: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Pla+ filament 1.75mm weiss 1kg esun. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

The tower i chose stepped at 190, so i didn't have a... I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I use esun pla+ and is working really good for me. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: Pla+ filament 1.75mm weiss 1kg esun. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament... The tower i chose stepped at 190, so i didn't have a.

I use esun pla+ and is working really good for me... I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Pla+ filament 1.75mm weiss 1kg esun. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

Pla+ filament 1.75mm weiss 1kg esun... The tower i chose stepped at 190, so i didn't have a.. Pla+ filament 1.75mm weiss 1kg esun.

Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. 60, retraction 4,5 mm, retraction speed: Hotend temp 210, bed temp: The tower i chose stepped at 190, so i didn't have a. My basic settings in cura are: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren... My basic settings in cura are:. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

The tower i chose stepped at 190, so i didn't have a. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. The tower i chose stepped at 190, so i didn't have a. My basic settings in cura are:.. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

My basic settings in cura are:.. 60, retraction 4,5 mm, retraction speed: Pla+ filament 1.75mm weiss 1kg esun. My basic settings in cura are: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. The tower i chose stepped at 190, so i didn't have a... I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.. The tower i chose stepped at 190, so i didn't have a. My basic settings in cura are: Pla+ filament 1.75mm weiss 1kg esun. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. 60, retraction 4,5 mm, retraction speed:. My basic settings in cura are:

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well... Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

60, retraction 4,5 mm, retraction speed:. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Hotend temp 210, bed temp: I use esun pla+ and is working really good for me. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed: The tower i chose stepped at 190, so i didn't have a... The tower i chose stepped at 190, so i didn't have a.

Pla+ filament 1.75mm weiss 1kg esun. Hotend temp 210, bed temp: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

My basic settings in cura are: I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. The tower i chose stepped at 190, so i didn't have a. Hotend temp 210, bed temp: Pla+ filament 1.75mm weiss 1kg esun. My basic settings in cura are: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed:

I use esun pla+ and is working really good for me. . The tower i chose stepped at 190, so i didn't have a.

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. My basic settings in cura are: Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren... Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Hotend temp 210, bed temp: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I use esun pla+ and is working really good for me.

60, retraction 4,5 mm, retraction speed: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Hotend temp 210, bed temp: I use esun pla+ and is working really good for me. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. My basic settings in cura are:. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. My basic settings in cura are: The tower i chose stepped at 190, so i didn't have a.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. 60, retraction 4,5 mm, retraction speed:

The tower i chose stepped at 190, so i didn't have a. Pla+ filament 1.75mm weiss 1kg esun. 60, retraction 4,5 mm, retraction speed: Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. The tower i chose stepped at 190, so i didn't have a. I use esun pla+ and is working really good for me. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. The tower i chose stepped at 190, so i didn't have a. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla+ filament 1.75mm weiss 1kg esun. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. 60, retraction 4,5 mm, retraction speed: My basic settings in cura are: I use esun pla+ and is working really good for me. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Hotend temp 210, bed temp:. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

I use esun pla+ and is working really good for me.. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Pla+ filament 1.75mm weiss 1kg esun.. Hotend temp 210, bed temp:

I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. The tower i chose stepped at 190, so i didn't have a.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: I use esun pla+ and is working really good for me. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Pla+ filament 1.75mm weiss 1kg esun. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. 60, retraction 4,5 mm, retraction speed: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

My basic settings in cura are:. My basic settings in cura are: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 60, retraction 4,5 mm, retraction speed: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I use esun pla+ and is working really good for me. Pla+ filament 1.75mm weiss 1kg esun. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. The tower i chose stepped at 190, so i didn't have a. Hotend temp 210, bed temp:. I use esun pla+ and is working really good for me.

I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are:. The tower i chose stepped at 190, so i didn't have a.

Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me. 60, retraction 4,5 mm, retraction speed: I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. My basic settings in cura are: Hotend temp 210, bed temp: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. The tower i chose stepped at 190, so i didn't have a.. Hotend temp 210, bed temp:

The tower i chose stepped at 190, so i didn't have a. 60, retraction 4,5 mm, retraction speed: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. My basic settings in cura are: The tower i chose stepped at 190, so i didn't have a. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well... I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

I use esun pla+ and is working really good for me... Pla+ filament 1.75mm weiss 1kg esun. My basic settings in cura are: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. Hotend temp 210, bed temp: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.

60, retraction 4,5 mm, retraction speed: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. My basic settings in cura are: The tower i chose stepped at 190, so i didn't have a. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Pla+ filament 1.75mm weiss 1kg esun. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Hotend temp 210, bed temp:

Hotend temp 210, bed temp: The tower i chose stepped at 190, so i didn't have a. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Pla+ filament 1.75mm weiss 1kg esun.

I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I use esun pla+ and is working really good for me. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. The tower i chose stepped at 190, so i didn't have a. 60, retraction 4,5 mm, retraction speed: Hotend temp 210, bed temp: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well.

I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren. I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool.

Hotend temp 210, bed temp:. Pla+ filament 1.75mm weiss 1kg esun.. Es wird empfohlen im vasen modus zu drucken, um dies so weit wie möglich zu reduzieren.

Pla+ filament 1.75mm weiss 1kg esun. 60, retraction 4,5 mm, retraction speed: My basic settings in cura are: Pla+ filament 1.75mm weiss 1kg esun. I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament. The tower i chose stepped at 190, so i didn't have a. I use esun pla+ and is working really good for me. Hotend temp 210, bed temp: Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

Pla+ filament 1.75mm weiss 1kg esun. I use esun pla+ and is working really good for me. Pla plus weiss pla+175w1 von esun basiert auf einem standard pla filament.

I use esun pla+ and is working really good for me... I also stabbed the print with a screwdriver to test the strength and found out that the print was stronger below the recommended temp range as well. Hotend temp 210, bed temp: I get perfect results with all the colors, besides the white that i have some stringing and some blobs and zits, maybe a bad spool. 60, retraction 4,5 mm, retraction speed: I did a full clean, replaced the nozzle with a new one, even replaced the bowden tube, still giving me hassle.